HomeUtah Permitting › Box Elder County
🌾 Utah's ag & heavy-snow north end

Metal building permits in Box Elder County

Brigham City, Tremonton, Perry, Willard, Corinne and Garland: Box Elder sits at the north end of the Wasatch Front. Heavy ag and hay-storage demand, and a snow load closer to Cache Valley's than Salt Lake's.

Code criteria (Box Elder County)ValueWhat it means for your build
Building-permit threshold200 sq ft (IRC default)Under 200 sq ft is usually permit-exempt but still needs zoning compliance & setbacks.
Ground snow load≈42 psf (Brigham City, ~4,423 ft)Heavier than Davis or Salt Lake County, closer to Cache Valley's load. Mantua & Sardine Canyon areas run higher.
Design wind speed~90–105 mph typicalStandard Wasatch-area wind; not flagged as a special wind region.
Seismic design categoryD / D1 (confirm per site)Northernmost mapped trace of the Wasatch Fault passes near Brigham City. Engineered anchorage required.
Frost / footing depth30″ (more at elevation)Foundation must bear below frost line.
Adopted codes2021 I-codes · 2020 NECStatewide since July 1, 2023.

Figures shown are representative Brigham City values. Box Elder County is a Utah Snow Load Study "case study" area. Your engineer determines the exact site value. Verify permit specifics with your city building department.

Do you need a permit?

Box Elder County cities generally follow the Utah default: a detached accessory building over 200 sq ft needs a building permit. Under 200 sq ft is typically permit-exempt but still has to meet your city's setback and zoning rules. A metal garage or shop with a foundation and electrical needs a permit regardless of size.

Ag and hay-storage demand runs heavy here

Box Elder is Utah's northern ag corridor. Hay sheds, equipment storage, and open-front farm buildings are common requests. Cold-formed steel handles wide clear spans well for this kind of use, and every building still ships with PE-stamped engineering sized to your site.

Snow load. Closer to Cache Valley than Salt Lake

Brigham City's valley-floor design ground snow load runs around 42 psf at roughly 4,423 ft elevation. Meaningfully heavier than Davis County (30 psf) or Salt Lake County (28 psf), and closer to Cache Valley's 43 psf. If your property sits toward Mantua or up Sardine Canyon, expect the engineered value to run higher still.

How an outbuilding gets approved, step by step

  1. Confirm your city's threshold, zoning, setbacks & size caps.
  2. Engineer the building with PE-stamped drawings (we handle it).
  3. Submit the building-permit application with a site plan.
  4. Pour the foundation to engineered depth & anchorage.
  5. Install & inspect. Framing and final, handled by your contractor.

Cities we serve in Box Elder County

Brigham CityTremontonPerryWillardCorinneGarlandFielding

Box Elder County permitting FAQ

What size shed needs a permit in Box Elder County?

Over 200 sq ft requires a building permit in most Box Elder cities. Confirm your specific city's setback and zoning rules before you build.

What snow load applies to my property?

About 42 psf at Brigham City's valley-floor elevation (~4,423 ft), heavier than Davis or Salt Lake County. Mantua and Sardine Canyon areas run higher due to elevation.

Is Box Elder County good for hay sheds and open-front farm buildings?

Yes. It's one of our most common request types here. Cold-formed steel spans wide clear openings well, and we engineer every building to your site's exact snow and wind loads.

Do you provide the engineered drawings for the permit?

Yes. Every building includes PE-stamped engineering prepared for your loads and jurisdiction.

Price a building that fits your lot & your city's rules

Get instant pricing, then a firm quote with engineering sized to Box Elder County code.

Get Instant Pricing Talk to a Specialist