Home › Davis County › Kaysville
📍 Kaysville, Davis County

Steel garages & shops in Kaysville, Utah

Royalty Metal Buildings is based in Kaysville. Here is what the city allows for a detached steel garage or shop, what is changing in 2026, and what one costs in Davis County.

Kaysville at a glanceWhat it means for your building
Permit neededOver 200 sq ft needs a building permit. Smaller buildings skip the building permit but still follow zoning. Electrical or plumbing always needs a permit.
Size limitNo more than 10% of the lot or 3,000 sq ft, whichever is smaller. All accessory buildings together: no more than 20% of the lot, minus the house footprint.
Over 3,000 sq ftOnly by conditional use (Planning Commission), in zones that allow it.
HeightMust stay under a line that starts 12 ft above ground at the property line and rises at 45 degrees into the lot, up to the zone maximum (30 ft in the single-family zones).
SetbacksNot in the front yard or a required side yard. Buildings 200 sq ft and over: at least 1 ft from the property line under the current code (see the note below).
ElevationAbout 4,350 ft, Davis County.

From Kaysville's published code and permit pages, checked October 2026. Rules change, so confirm with the city before you build. Snow, wind and seismic values: see the Davis County guide.

What a steel building costs in Kaysville

Building package estimates for Davis County from our live estimator (October 2026, 3:12 roof, 10×10-class roll-up doors). Foundation, site prep and erection are separate.

BuildingDavis County estimate
24×30×12 garage or small shop$17,700 – $22,000
30×40×14 shop, 2 roll-up doors$30,700 – $38,100
40×60×16 shop, 2 roll-up doors$61,700 – $76,700

Your written quote is the firm number. More on steel shop pricing in Utah →

Getting a steel building approved in Kaysville

Heads up: Kaysville is reviewing its accessory building rules. In August 2026 the Planning Commission voted to discuss changes focused on larger structures, including how close they can sit to lot lines. A temporary regulation adopted in August was repealed on September 17, 2026, but new rules look likely. Call the city before you finalize where a large steel shop goes.

The 45-degree height rule means a taller building has to sit farther from the property line. Tell us your lot size and where you want the building, and we will size the walls and roof to fit.

  1. Check your zone and HOA. Confirm size, height and setbacks for your lot with Kaysville City Building Department.
  2. Size the building to fit. We price it and engineer it with PE-stamped drawings for your address.
  3. Apply for the building permit with the drawings and a site plan.
  4. Pour the foundation to the engineered depth and anchorage.
  5. Erect and inspect. Your crew builds it; the city inspects it.

Kaysville City Building Department

23 E Center Street, Kaysville, UT 84037 · 801-544-1363 · Community Development 801-546-1235. City permit page →

Kaysville steel building FAQ

Do I need a permit for a shed or garage in Kaysville?

Accessory buildings over 200 square feet need a building permit. Smaller buildings do not need a building permit but must follow zoning rules, and any electrical or plumbing needs its own permit.

How big can an accessory building be in Kaysville?

Up to 10% of the lot area or 3,000 square feet, whichever is smaller, and all accessory buildings together can cover no more than 20% of the lot minus the house. Larger buildings need a conditional use permit.

Is Kaysville changing its accessory building rules?

It looks likely. In August 2026 the Planning Commission voted to discuss amendments for larger accessory structures. Confirm the current rules with the city before you build.

What does a steel shop cost in Kaysville?

A 30x40 shop with 14-foot walls and two roll-up doors estimates at about $30,700 to $38,100 for the building package in Davis County on our live estimator (October 2026). Foundation and erection are separate.

Price a building that fits your Kaysville lot

Get a live estimate now, then a firm quote with drawings engineered for your address.

Get Instant Pricing Talk to a Specialist